Home > Equipment > Sawmills

Sawmills

 

See also :: Heavy :: Kilns :: Tools

 

Wood-Mizer industrial sawmills

Industrial sawmills and Smart Log Processing lines are capable of commercial-level production, while still leveraging the inherent advantages of the thin-kerf blades – lower operational costs and higher yield from every log.

WM4000 Sawmill

The WM4000 is the next generation in thin-kerf sawmilling. The WM4000 combines the profitability enhancements of thin-kerf blades with productivity advances in automated sawing technology to create an ideal solution for any sawmill. 

Power:

Standard 22 kW

Cutting capacity:

Length: 6.5 m

Length (with board removal): 6.3 m

Diameter: 910 mm

Touch screen Setworks
Servo motor up / down
Power feed
Electric blade guide arm
Automatic blade lubrication
Roller & double block blade guides
Laser sight
Blade tension

WM3500 Sawmill

The WM3500 is a proven industrial thin-kerf sawmill for primary log breakdown, and for cutting logs which cannot be processed in an automated line. The WM3500 delivers higher log yield at lower investment and operating cost than alternatives, increasing profitability and ability to produce diverse products quickly. 

Power:

Standard 22 kW

Cutting capacity:

Length 6.5 m 

Length with board removal 6.3 m 

Diameter 910 mm 

Computer Setworks
Power up/down
Power feed
Electric blade guide arm
Automatic blade lubrication
Roller & double block blade guides
Laser sight
Blade tension

WM1000 Sawmill

The Wood-Mizer WM1000 saws large softwood, hardwood and tropical logs up to 1.7 metres in diameter. This sawmill uses narrowband, thin-kerf blades to deliver higher log yields than traditional large-log sawing methods. 

Power:

Standard 22 kW

Cutting capacity:

Length only limited by rail length 

Max. Diameter 

1.7 m - No bed
1.18 m - Manual bed
1.63 m - Manual bed with rail support system

Ride-along operator station
Power up/down
Power feed
Setworks
High performance blade guides
Hydraulic blade tension system
Two-sided blade lubrication
1070 mm diameter steel blade wheels

Smart Log Processing

The SLP (Smart Log Processing) line uses thin-kerf blades on each sawmill unit in the line to deliver better log yield than other processing methods.

SLP1

Highly popular among pallet manufacturers, the SLP specializes in making the most profit possible from low value logs up to 400 mm in diameter and increasing your competitive edge. The SLP line has been successfully used in sawing high quality construction grade timber to pallet material. It is a diverse line that can be adapted to many different configuration requirements to suit the sawmillers needs.

Power:

TVS-SC2.4L: 2 x 11 kW

HR200: 15 kW

HR500: 2 x 11 kW

HR700: 2 x 15 kW

Power supply: 400V / 50 Hz, 3Ph

Cutting capacity:

Min. Log diameter: 100 mm 

Max. Log diameter: 400 mm 

Min. Log length: 1.2 m 

Max. Log length: 2.4-3.6 m 

Min. Cut width: 70 mm 

Max. Cut width:250 mm

Please contact us at info@smlumber.dk for prices.

Home > Equipment > Sawmills
Contact Information
49 Howitzvej St, 2000 Frederiksberg, Denmark
 
info@hmathiasen.com
info@smlumber.dk
Copyright © 2018 H.Mathiasen Holding ApS. All rights reserved.