Home > Equipment > Heavy > 880

880 logger

 
 

The Tigercat 880 logger is a multi-purpose, no compromise carrier designed for loading, shovel logging and processing.

The 880 is purpose-built to eliminate the design compromises found in excavator conversions. The upper frame assembly and undercarriage are designed for full forest duty.

One machine. Three jobs. The 880 can be configured as a loader with various power clam and butt-n-top grapple options. The boom geometry and cab positioning provide unmatched right-hand side visibility. Equipped with a live heel boom system, the 880 is a highly capable shovel logger with excellent stability, tractive effort and swing torque. The 880 can also be configured as high capacity processor capable of running large harvesting heads in demanding duty cycles.

Some of the many advantages of the 880 over excavator conversions include higher cooling capacity, a better operating environment, stronger undercarriage components and extremely efficient hydraulic circuits. The result is higher production, uptime and fuel efficiency for lower operating cost per tonne.

Key Benefits

  • High horsepower engine significantly increases machine productivity and travel speed relative to excavator conversions without compromising fuel efficiency
  • Dedicated swing pump – reserves all main hydraulic pump flow for boom and attachment functions, increasing speed and productivity
  • Energy recovery swing system – closed loop drive feeds power back to the engine as swing decelerates, reducing heat and fuel consumption and recovering energy for other machine functions
  • Large diameter swing bearing with twin swing drives for high torque and long life
  • Power operated side door and clamshell-style roof enclosure for excellent access to major components and daily service points
  • Super-duty Tigercat-built FH400 forestry undercarriage 
  • High illumination HID lighting – low glare, daylight working conditions for nightshift productivity, high reduced operator fatigue
  • High capacity cooling system – automatic variable speed for improved fuel efficiency; automatic reversing cycle to purge dust and debris
  • Full length front window and additional floor windows for clear sightline to the tracks

DIMENSIONS:

WIDTH with steps ..............................3 630 mm (143 in)
SHIPPING HEIGHT ..............................3 430 mm (135 in)
GROUND CLEARANCE .......................710 mm (28 in)
WEIGHT less attachment ...............42 640 kg (94,000 lb)
TAIL SWING over rear .....................3 500 mm (138 in)
TAIL SWING over side .....................1 700 mm (67 in)

POWER:

ENGINE .....................................Cummins QSL9 Tier 3 224 kW (300 hp) @ 1800 rpm
AIR FILTRATION ...................Precleaner, 2-stage engine air cleaner
COOLING ...................................Side-by-side aluminum radiator, oil cooler, charge air cooler and A/C condenser
Optional ....................................Removable intake debris screen
FAN ..............................................Hydraulic driven automatic variable speed, reversible
FUEL CAPACITY usable ...1 300 L (343 US gal)

HYDRAULIC SYSTEM:

PUMP, MAIN .........................................Piston, load sensing
PUMP, SWING .....................................Piston, closed loop, energy recovery
PUMP, ATTACHMENT .......................Piston, load sensing
PUMP, COOLING FAN ......................Piston
RESERVOIR ............................................225 L (60 US gal)
FILTRATION ............................................(5) Spin-on, 7 micron full flow
(1) water absorbing
CYLINDERS, HOIST ...........................(2) 150 mm (5.9 in) bore
CYLINDER, STICK ...............................170 mm (6.7 in) bore
CYLINDER, LIVE HEEL ....................130 mm (5.2 in) bore
CYLINDER, TILT ...................................110 mm (4.3 in) bore
HORSE POWER CONTROL ............Electronic speed sensing

UNDERCARRIAGE:

TRACK FRAMES ...........................F7-163 heavy duty forestry, integral track guides, ramp angles
TRACK CHAIN ................................FH400 215 mm (8.5 in) pitch
FINAL DRIVE .................................(2) Axial piston motors; Infinitely variable speed
TRACTIVE EFFORT ......................334 kN (75,000 lbf)
GEARBOX ........................................Triple reduction planetary with brake
FRONT IDLER ................................Hydraulic track adjuster; Spring shock absorber
SLIDES, UPPER ...........................Replaceable, bolt-on
ROLLERS, LOWER ......................(9) FH400 single/double flange, excavator
TRACK SHOE ..................................710 mm (28 in) double grouser, tall lug

TOP SPEED:

LOW RANGE .........2,3 km/h (1.4 mph)
HIGH RANGE ........4,5 km/h (2.8 mph)

BRAKES:

TRACK ..........Friction disc; Automatic spring applied, hydraulic release
SWING ........Friction disc; Manual spring applied, hydraulic release

ROTATING UPPER:

SWING DRIVE .....................6,7 rpm variable speed; 360° continuous rotation, double reduction, twin swing drive planetary gearboxes, twin piston swing motors
SWING BEARING ...............1 370 mm (54 in) ball circle diameter
ENCLOSURE ..........................Hydraulically operated roof and side engine enclosure, with manual backup; Large air intake for cooling system; Vandal protection; Smooth exterior

BOOM SYSTEM live heel:

MAXIMUM RADIUS .............................12 650 mm (498 in)
BARE PIN LIFT full reach* ............5 580 kg (12,300 lb)

BOOM SYSTEM power clam/butt-n-top:

MAXIMUM RADIUS ..............................11 355 mm (447 in)
BARE PIN LIFT full reach* .............7 620 kg (16,800 lb)

BOOM SYSTEM harvester:

MAXIMUM RADIUS ..............................11 660 mm (459 in)
BARE PIN LIFT full reach* .............6 990 kg (15,400 lb)

OPERATOR'S STATION:

CAB ......................................................Insulated and pressurized; A/C, heater and defroster, full length polycarbonate windshield
Polycarbonate side, rear, door and floor windows, AM/FM digital stereo with CD player; (2) Power points
OPERATOR CONTROLS ............Hydraulic proportional boom/travel/swing
Electronic for horsepower/fan control
Electric switch for swing brake/speed
Electronic control system with colour LCD display screen
interface for machine monitoring and function adjustment
SEAT .....................................................Full suspension air ride, fully adjustable, armrest mounted Tigercat joysticks

ELECTRICAL:

BATTERY ................................(2) 12 v
ALTERNATOR ......................110 amp, 24 v
SYSTEM VOLTAGE ..........24 v
LIGHTING ...............................(12) Hight output LED; (5) LED service, engine enclosure

OTHER STANDARD EQUIPMENT:

Fuel suction strainer; Alarm for track movement
Load ticket chute

OPTIONAL EQUIPMENT:

Cold weather kit; High view cab mounted camera system
Heavy duty stick cylinder guard; Jaw/tilt control swap
Butt-n-top tilt float; Long reach butt-n-top stick boom;
Slasher saw hydraulics

Home > Equipment > Heavy > 880
Contact Information
49 Howitzvej St, 2000 Frederiksberg, Denmark
 
info@hmathiasen.com
info@smlumber.dk
Copyright © 2018 H.Mathiasen Holding ApS. All rights reserved.